How Do You Start a Gas Fireplace
One of the best sorts of hearth ideal today is the one that uses gas. With this fireside, householders needn’t burden themselves with buying wood and cleaning up the ashes after use. They even liberate themselves from foul smelling smoke. A gas hearth is an easy and simple to use unit that needs only a little upkeep. It is a way to enjoy the heat and wonder of a great fire that may be compared to one produced by wood. If a yellow-orange flame is not what you wish, you can select a unit that creates a blue and hotter flame. There are two options available if you opt to have a gas fire. You can go for the vented gas logs or the unvented type. For the units, there are many designs you may select from like the oven type, gas logs or those that may be mounted on the wall. Vented gas logs. The gas logs are routinely vented to permit the dangerous gases produced in the burning process to go out of the house. These are excellent for fireplaces with chimneys though they can still be utilized in houses with no serviceable chimney. But use caution not to use the gas logs in a fire originally meant for wood burning as it can be threatening. For houses with no chimney, venting is still possible thru the installation of a special pipe.
Another safe option is direct venting which comprises the use of 2 layers of pipe. The pipe should run thru a hole in the wall just behind the hearth or a little above the unit. Vent free gas logs. These unvented gas logs are capable of manufacturing extremely hot flame but with low levels of carbon emissions and soot. They have an oxygen depletion sensor that turns off gas even before carbon monoxide levels in the room reaches a dangerous level. These fixtures have to be housed in a masonry type of hearth or in a special firebox that’s similar to a hearth. Additional care should be taken when using this unit as they create great heat. Fireside doors should stay open during use and combustible materials should be kept away from the area.
Employing a gas hearth is simple. To start it, you simply need to insert the key to the hole and turn it to the right.
The key is mostly attached to a valve in the wall that controls the gas. In lighting your fire, ensure to employ a long fire lighter. Make sure that the lighter faces towards the bottom of the logs close to the hole that releases the gas. You can adjust the quantity of gas during use. To do that, just turn the key further to the right if you’d like higher flames and adjust it again to the left for lower heat. To switch off the unit, you just turn the key to the left and then take away the key from the hole. Always make it a point to put the key on top of the fire mantle or any place out of youngsters’s reach and yet still obvious.